3.1
Standard Features
1
Plug-In Horsepower Resistor® –
Eliminates the need to calibrate the control for IR Compensation
and Current Limit when used on various horsepower motors.
2
Auto-Inhibit® –
Allows the control to be rapidly switched “on” and “off” using the AC line.
3
Inhibit and Enable –
Allows the control to be turned “on” and “off” using electronic switching.
4
Trimpots –
Minimum Speed (MIN), Maximum Speed (MAX), IR Compensation (IR), Current Limit (CL),
Acceleration (ACCEL), and Deceleration (DECEL).
5
Jumpers –
AC Line Input Voltage Selection (J1 (Catalog No. BC142-6 only)), Motor Voltage and DC
Tach-Generator Selection (J2).
6
Protection Features –
MOV transient protection. Short Circuit protected (at motor only).
7
Diagnostic LEDs –
Power On (PWR ON) and Current Limit (CL).
8
Catalog No. BC141 operates on 115 Volt AC line input with 90 Volt DC motors.
9
Catalog No. BC142 operates on 230 Volt AC line input with 180 Volt DC motors or 90 Volt DC motors
(step-down). - Jumper Selectable.
10
Catalog No. BC142-6 can operate on 115 Volt AC line input with 90 Volt DC motors and 230 Volt AC
line input with 180 Volt DC motors or 90 Volt DC motors (step-down). - Jumper selectable.
11
Armature or DC Tach-Generator feedback.
12
SMT construction.
8
