Baldan CRI-A, Инструкция по эксплуатации, Страница: 51 / 71

Instruction Manual
49 - CRI-A
10. MAINTENANCE
01 - 01 - CRI-A was developed to provide the maximum yield on the land conditions. Experience has shown that periodic maintenance of certain parts of
the harrow is the best way to prevent problems; hence we suggest the check.
TIRE PRESSURE (FIGURE 33)
CRI -A 40 / 44 / 48 DISCS
01 - 01 - The tires must always be correctly calibrated to avoid premature wears by excess or
lack of pressure, and by ensuring precision in the distribution.
Figure 33
Excess
Pressure
Lack of
Pressure
Correct
Pressure
Constantly check the nuts and bolts, and retighten if necessary. General retightening maintenance
of the equipment should be performed every 8 working hours.
The recommended calibration of 52 lb/inch² is for tires model 400 x 60 14 ply supplied with the CRI-A.
When calibrating the CRI-A, do not exceed the recommended calibration.
When purchasing the harrow without tires, it is recommended to consult the manufacturer on the
ideal calibration for the model of tire to be used on the harrow
The tire pressure of the tractor should be according to the pressure
recommended by the manufacturer.
ATTENTION
ATTENTION
NOTE