BALCO PrintMaker, Инструкция по эксплуатации

Страница: 6 / 24

6
Glossary of Terms
Build Tape:
The black tape that covers the PrintMaker’s print bed so that the object can stick to
the print bed well
Build Volume:
The three dimensional amount of space that an object will use once it is
completed. The largest build volume is 150*150*150mm
Cooling Fan:
Cools the outer assembly of the extruder and gear motor
Extruder:
The integral extruder device installed on the X-Axis. The extruder draws the filament
from the spool, melts it and pushes it through the nozzle onto the print bed
Filament Compartment:
Internal storage area located at the right of printer to store Balco
Filament
Filament Bowden Tube:
A white plastic tube that guides the filament from the filament storage
compartment to the filament intake
Filament Intake:
An opening located at the top of the extruder
Nozzle:
Also called “print head”, located at the bottom of the extruder where heated filament is
pushed out
Print Bed:
The surface on which the PrintMaker builds an object