BALCO PrintMaker, Инструкция по эксплуатации

Страница: 10 / 24

10
Setup Instructions
3.1 Unboxing & Setup
1.
Carefully remove your PrintMaker 3D Printer from the box, along with any additional
packaging around the printer
2.
Plug the power cable into the side of the printer and press the power switch to
ON
to operate
the 3D Printer
3.
To remove the protective cardboard inside the printer, go to
Tools Settings Move
on
the Touch Screen then long press the up arrow on the Z axis until the extruder is high enough
to remove the packaging
X
Y
Z
X: 20.00 Y: 45.00 Z: 36.00
<
2/3
<
Led
Camera Move
Filament Check
3.2 Navigating the Menus
This section provides a brief description of each menu function
and its associated sub-menu. Further details of each menu are
explained throughout the manual.
3.2.1 Build
Use the build menu to select and print files. Files can be loaded
to the PrintMaker 3D Printer via PC, USB, Wi-Fi or Cloud. Further
information on this menu under
section 5.1 Printing a File on
page 17.
The following sections explain the settings available within the
Build
menu, when loading files and during print.