BALCO KOG6789, Инструкция по эксплуатации

Страница: 36 / 60

36
After Sales Support
1300 663 907
Model Number
KOG6789
customercare@balcolifestyle.com.au
option on if your model could benefit from support material.
6.5.1 Exporting your GCODE File:
Take note of the time and length required to print your 3D object. From the top menu, select
File
>
Save GCODE
. You can now save your GCODE to your desired directory.
NOTE: Always reopen the GCODE file again in CURA to confirm that all slices of the model have been
included. This will open in the ‘layers’ view, if you want to see your object, select ‘normal’ view
6.6 Advanced Print Settings
Advanced print mode should not be used until you have gained sufficient experience with 3D
printing. In order to have more control of your slicing and GCODE generation, switch to advanced
print mode.
Enter advanced print mode by selecting
Expert
>
Switch to full settings…
Loading a Profile
When you first switch to Full Settings, Cura will revert to very generic settings. We recommend
using our tested profiles that are available at
balcolifestyle.com.au
. You will want to choose the
profile that matches your filament and quality needs. Once downloaded, you can load the file into
Cura by selecting File > Open Profile. Choose your desired profile. This will automatically update all
of your settings for use with your printer.
6.6.1 Basic Tab Options
QUALITY
Layer Height (mm)
The thickness of each printed layer is known as the Layer
Height. The smaller the layer height, the smoother curves
will appear. Larger layer heights are better for bridging and
overhangs. Smaller layer heights will also increase print
time, as it will take more layers to complete the object.
Shell Thickness (mm)
This defines the number of vertical walls that comprise the
outside of your model. We recommend keeping this set to multiples of your nozzle width. Your
Balco 3D Printer is equipped with a 0.4 mm nozzle.
Using Cura
.