3. Place the knob over one of the knob posts, making sure that
the hole in the knob matches the shape on the end of the
post. Figure C shows the proper orientation.
4. Slide a washer over a 6-32 screw and thred it into the hole in
the end of the knob post and secure the knob in place. See
Figure D.
5. Tighten with the Allen wrench, turning clockwise and repeat
on three remaining posts.
6.
ATTACHING THE FRAME HANDLE
For shipping purposes the IQ frame handle comes unattached.
The handle makes it easier for you to lift the IQ into the upright
storage position.
To install the handle, insert the two large socket caps screws
through the holes in the handle and into the head-end of the
frame. as shown (see Figure E). Use the 3⁄16” Allen wrench to
tighten the screws.
Flat edges of knob
Matching slot in knob
Figure D
FIgure E
Insert screws here
Figure C
2
