15
b) Recalling a previous measurement
First of all, select "your" memory block. For this, re-
peatedly press the button
, until "your"
memory block, „no.1“ to „no.3“, appears in the
display.
Press the button
to call up the indicated
memory block. There then appears on the lower dis-
play line an
A
(= average) and, in alternating display,
the average values of the last three measurements
as well as the programmed limit values for the
appropriate individual are shown.
Press the button
again. In the lower display
screen the number of saved measurement values
for the individual memory block are shown. Pressing
again on the button
allows you to browse
through all saved measurement results. The date
and time of measurement for each is indicated.
MEM
MEM
MEM
SET
