16
c) Erasing stored measurements
When all memory spaces are occupied, the appliance
automatically overwrites the oldest measurement.
Should you however wish to erase all measured
values, select first of all „ your" memory block.
For this, repeatedly press the button
until "your"
memory block, „no.1“ to „no.3“, appears in the display.
Press the button
to call up the indicated
memory block.
+
Now press the buttons
and
at the same time.
CLA
appears in the display. All
measured values in „your" memory block are
now erased.
10. Cleaning and Care
• Carefully clean the equipment and pressure
sleeve using a slightly damp cloth only.
• Do not use chemical agents or solvents for
cleaning.
• Do not, under any circumstances, immerse the
appliance in water, as fluids will penetrate through
to the inside. This would cause irreparable damage
to the appliance.
MODE
SET
MEM
SET
