6
The trend pointer (A5) displayed on the LCD indicates the trend of the outdoor
temperature.
Indicating the outdoor temp.
is rising
Indicating the outdoor
temp. is steady
Indicating the outdoor
temp. is falling
(3)Celsius / Fahrenheit
Press “°C /°F” button (B7) to select Indoor/Outdoor Temperature in Celsius mode or
Fahrenheit mode.
If the temperature is out of the measurable range, LL.L (beyond the minimum
temperature) or HH.H (beyond the maximum temperature) will be shown on the LCD.
(4) Maximum / Minimum Temperature & Indoor Humidity Recording Function:
Press “MAX/MIN” button (B5) to show the maximum recorded Indoor /Outdoor
Temperature and Indoor Humidity. “
” is shown on the LCD
Press “MAX/MIN” button again to show the minimum recorded Indoor/Outdoor
Temperature and Indoor Humidity. “
” is shown on the LCD.
Hold “MAX/MIN” button (B5) for 3 seconds to clear the recorded maximum and minimum
reading.
(5) Comfort Indicator Bar “
” (A16) for the display of
pleasant/unpleasant climate.
(6) The use of 1.5m cord Temperature Probe:
Insert the probe plug (D6) to the jack on the right hand side of the Thermo Sensor Unit.
Put the cable outside and leave the Thermo Sensor Unit indoor to avoid freezing up the
battery when the outdoor temperature is below -20 °C.
Always use the temperature probe to sense the temperature when the temperature is
between the following range: -50 °C ~ 0°C and +50°C ~ + 70°
8. Time and Alarm Setting
8.1 Radio Controlled Clock:
After batteries inserted and main unit finishes receiving the transmissions from outdoor
thermo sensor, the clock automatically starts to scan the DCF time signal. Radio Control
Icon“
” (A12) flashes on the LCD.
(A12) flashes
Indicating now is receiving
(A12) turns on,
Indicating signal received
(A12) disappear,
Indicating signal reception
