8
When the country time is faster than the German time for 1 hour, the zone should be set
to +1. Then the clock will automatically set 1 hour faster from the signal time received.
Note:
(1) Second adjusted to zero only.
(2) The Time Setting Mode will automatically exit in 15 seconds without any adjustment.
8.3 12/24 Hour Display mode:
Press “(12/24)” button (B8) to select 12 or 24 hours mode.
8.4 Daily Snooze Alarm Function:
Press “MODE” button (B3) to select to view :
Time Weekday Alarm Time (“AL” Shown on the LCD)
When viewing the Alarm Time, hold “MODE” button (B3) for 3 seconds to enter Alarm
Time setting. Press “-” (B9) or “+” (B8) button to adjust the alarm time. Press “MODE”
button (B3) to confirm the setting.
Press “AL ON/OFF” button (B2) to switch alarm on or off. If it is on, “
” shown on the
LCD.
When Alarming, press “SNOOZE / LIGHT” button (B6) to activate the snooze alarm,
(“
” flash on the LCD). The alarm will snooze for 5 minutes, then it alarms again. This
snooze function can be enabled for maximum 7 times.
8.5 Dual Time Setting Function
Press “MODE” button (B3) to select to view :
Time Weekday Alarm Time Dual Time (“DT” shown on the LCD)
When viewing the Dual Time, hold “MODE” button (B3) for 3 seconds to enter Dual Time
setting. “Hour” & “Min” digits flash. Press “-” (B9) or “+” (B8) button to adjust the “hour”,
press “MODE” button (B3) to confirm and quit the setting.
9. Moon Phase Display
The Moon Phase (A7) of each day is shown on the LCD.
