8
© 2010 Bakker Hydraulic Products B.V.
Nijverheidsweg 6
6662 NG Elst (Gld) The Netherlands
Tel : + 31 481 374757 Fax : + 31 481 375280
Site :
E-mail :
2.8 THE SADDLE PLATE :
2.8.1 Dismantling the saddle plate :
Undo the two M10 bolts and remove the so-called "locking spanner",
which is fastened to the bottom strip of the saddle plate.
Use this spanner to undo the two locking nuts.
Undo the two M10 bolts and remove the two shafts.
Now the saddle plate can be removed without any problems.
2.8.2 Assembling the saddle plate :
Assemble the saddle plate in the reverse order to which you dismantled it.
2.9 THE CYLINDERS :
Removing the cylinder :
Place the grab bucket in the closed position and make sure it is stable.
Remove the pins at each end of the cylinder.
Pull in the piston rod with the aid of oil pressure and make sure when
doing so that the cylinder ends are protected from damage.
Once this has been done, the cylinder can be removed in its entirety.
Dismantling the cylinder :
Unscrew and remove the head bush.
When the head bush is removed, carefully remove the piston rod.
Caution!
Take care not to damage the piston rod.
To replace the seals, you must first remove the outer cylinder tube.
The non-return valve can be removed and mounted at all times without
any problems, providing there is no pressure on the cylinder.
Содержание BDV 2020
Страница 1: ...OPERATING MANUAL Grab Bucket BDV 2020 ...
