Baker ReCO2ver, Руководство пользователя

Страница: 17 / 34

July 2021 17
with the 4-20mA CO
2
transmitter is detected
4-20mA 2 ERR 0
1
2
Communications Error
Over temperature
Open Loop
This event shall be
generated when a fault
with the 4-20mA Temp
transmitter is detected.
H
2
O ERR 0
1
Sensor Communications Error
Calibration Range Error
This denotes an error
with the Water Pan
Temp sensor or value.
D/F ERR 0
1
Sensor Communications Error
Calibration Range Error
This denotes an error
with the Door/Face
Temp sensor or value.
UPDATE START n/a This event shall be
generated when “OK” is
pressed on the
“Firmware Update Prep”
screen, 36.13. This
indicates the firmware
update has started.
UPDATE STATE 0 = All firmware related have been
successfully copied from the USB drive to
the internal SD drive
1 = The system has or will reboot due to
the update process.
This event shall be
generated when
important milestones
are reached during the
firmware update
process.
UPDATE DONE n/a This event shall be
generated when the
firmware update
successfully completes.
This is triggered on the
transition from the
“Firmware Update”
screen, 34, to the
“Firmware Update
Complete” screen, 37.7.
UPDATE ERR 0 = The USB drive contains more than
four .bin files, the update is unable to
proceed.
This event shall be
generated when there is
an error with the
firmware update. This
may be generated
multiple ways.