Page 54 of 61
Reinstalling workstation components:
Place the floor tray inside the workstation chamber.
Reinstall the storage racks.
Replace the waste port lid and waste port bag if fitted.
Reinstall any equipment removed from the workstation chamber.
Close the outer interlock doors
Plug the workstation back in at the mains.
Switch the workstation on.
Go into the setting menu, reinstall the front screen, activate the seal and connect
the glove port pneumatic connector
Select the required mode from the main control menu for the workstation chamber.
Cells can be reintroduced to the workstation from the alternative storage facility
through the interlock or SPES (if fitted).
