Baker Becker VRP-CH Series, Инструкция по эксплуатации

Страница: 24 / 36

24 | Baker Hughes Copyright 2023 Baker Hughes Company. All rights reserved.
600-CH Diaphragm Assembly
Insert - 012 O-ring (A) into the bottom piston (B). Insert the inner
tube (C) into the spring chamber (D). Insert the bottom piston
(B) into the diaphragm with convolute (E). Clamp the assembly
together by holding the bottom piston (B) in a vise while threading
1/2-20-inch SS jam nut (F) onto the bottom piston (B). Torque
the jam nut (F) to 140-160 in.-lbs.
Figure 6: Assembling the diaphragm
Figure 7: Connecting the pistons
600-CH Spring Chamber Assembly
Bolt the spring chamber (D) to the top body assembly (H) using six
(6) fiberglass washers (J) and six (6) 1/4-20 x 2-inch SHCS (K).
Figure 8: Bolting the spring chamber
600-CH Chamber Assemblies
600-CH Top Spacer Assembly
Orient Top Spacer (G) onto Top Body Assembly (H). Place
diaphragm assembly onto Top Spacer (G). Making sure not
to twist Diaphragm (E), thread Bottom Piston (B) into Outside
Piston (I) by holding Spring Chamber (D), and rotating Inner
Tube (C) clockwise.Inner Tube (C) is rotated with same socket
wrench used to hold the Jam Nut (F) in the diaphragm assembly.
When Inner Tube (C) cannot be rotated any more do not force it,
this assembly should only be hand-tight.