Baker Hughes Panametrics MTS6, Руководство пользователя

Страница: 56 / 106

Chapter 3. Operation and Programming
48 Moisture Target Series 6 User’s Manual
3.6.5 Setting Calibration Data 2
Note: If you are using a
VeriDri
probe, the following steps will apply. For a standard
M Series
probe, see Setting
Calibration Data 1 on page 45.
To view calibration data, from the
Settings Menu
select
Cal Data
and press
Enter
. The
following screen appears.
Note: To access the
Cal Data
menu, the
User Passcode
is required (see section 3.6.1 on
page 43).
Use the left and right arrow keys to select each digit to be changed and the up and
down arrow keys to increase or decrease its value. Once the passcode has been
entered, press
Enter
and the following screen appears.
If you are using a
VeriDri
probe, the
FH/DPCal
will be highlighted. Press
Enter
. The following screen appears.
3.6.5.1 Selecting the Calibration Point
To select the calibration point, highlight
Select Cal Point
and press
Enter
. The following
screen appears.
Use the left and right arrow keys to select each digit to be changed and the up and
down arrow keys to increase or decrease its value. Press
Enter to save (or Cancel
to keep the previous value), and return to the Edit MH/DP Cal menu.
3.6.5.2 Reading the FH Value
To view the FH value, highlight
Read FH Value
and press
Enter
. The following screen
appears.
Settings Menu
Cal Data...
Fault Alm...
V/V Ratio...
Clock...
AutoCal...
Probes
DpC Offset

0000
/=Save =Cancel
User Passcode:





