If the number of decimal
places is acceptable,
press
escape
. To change
the number of decimal
places, press
enter
.
Use the
up
and
down
keys
to change the number
of decimal places and
press
enter
.
The programming sequence is now complete and you are
returned to the
view
menu.
2.2.4 Setting up the display
To set up the display, complete the following steps:
Use the
up
and
down
keys
to select display and press
enter
. Then, enter your
passcode and press
enter
.
Use the
up
and
down
keys
to select display and
press
enter
.
If the display type is
acceptable, press
escape
to return to the previous
menu. To change the
display type, use the
up
and
down
keys to select
normal or reverse and
press
enter
.
If you wish to change the display contrast, at the above
screen, highlight that choice and press
enter
.
Use the arrow keys to
change the contrast value
and press
enter
. Then
press
escape
twice to
return to the main menu.
2.2.5 Setting up the analog output
To set up the analog output, complete the following steps:
After entering your
password, use the
right
arrow key to scroll to
output and press
enter
.
Select the measure option
and press
enter
.
Use the arrow keys to
scroll to the desired
output parameter and
press
enter
.
In the output menu, select type and press
enter
. The
following screen appears:
Select the desired output
type and press
enter
.
If special was chosen at the previous prompt, the following
screen appears:
Select
zero
and press
enter
.
Use the arrow keys to
enter the zero value for
the special output and
press
enter
.
Repeat the above two steps to enter the
span
value for the
special output. In the output menu, select range and press
enter
. The following screen appears:
12
Содержание Panametrics HygroPro
Страница 1: ...HygroPro User s manual 916 099 Rev D...
Страница 2: ...ii...
Страница 3: ...HygroPro Moisture transmitter User s manual 916 099 Rev D November 2012 iii...
Страница 4: ...no content intended for this page proceed to next page iv...
