background image

Mooney Series 21 Regulator Instruction Manual  |  3

Copyright 2021 Baker Hughes Company. All rights reserved.

Figure 2

Figure 3 

Nameplate for Series 21, 21H, 21S, & 21HS  

Mooney Regulators.

Figure  4

Spring Range Nameplate for Series 21 & 21S  

Mooney Regulators.

Figure 5

Spring Range Nameplate for Series 21H & 21HS  

Mooney Regulators.

Table 3

1

2

Specifications

Series

Spring Range

Color

Part Number

21 & 21S

  3  -  12 psi   

(0.2 - 0.8 bar)

Red

040-014-01

  10  -  40 psi   

(0.7 - 2.7 bar)

Plated

040-011-01

  25  -  90 psi   

(1.7 - 6.2 bar)

Blue

040-012-01

  60  -  200 psi  

(4 - 14 bar)

Purple

040-008-01

 100  -  260 psi  

(7 - 18 bar)

Black

3

040-009-01

 200  -  450 psi  

(14 - 31 bar)

Green

3

040-020-01

21H & 21HS

 200  -  520 psi  

(14 - 36 bar)

Black

3

040-009-01

 400  -  900 psi  

(27 - 62 bar)

Green

3

040-020-01

Spacer on Adjustment Screw Required

Regulator Markings 

(Refer to Figure 2)
 

Location of the Regulator nameplate.

 

 Location  of  spring  range  nameplate.  The  factory  marks 

the nameplate to indicate which spring is installed at 

manufacture date. If the spring is changed make sure to 

note it on the nameplate.

 

 The month and year the regulator is manufactured is noted 

on the Spring Case, Body, and Body Insert of the regulator.

Item

Definition

Mooney Regulator

Trademarked name of regulator.

Series

Model number of regulator.

Control Pressure

The control pressure is limited to 

the spring range of the spring on the 

regulator (Refer to Fig. 4 for Series 21 

& 21S regulators).

Sense & Outlet 

Pressure

Maximum allowable pressure in 

sense/outlet ports. 

Inlet Pressure

Maximum allowable pressure (psig) to 

the Inlet port.

Spring Case (Vent) 

Pressure

Maximum allowable pressure (psig) to 

the Spring Case (Vent) port.

Bolt Torque

Recommended bolt torque for spring 

case in foot pounds.

Red, Plated, Blue, 

Purple, Black and 

Green

Each spring is color coded to indicate 

the control pressure range.

Adjusting Screw 

Spacer

The black and green springs require a 

spacer on the adjusting screw to avoid 

over compression.

3

SPRING RANGE

RED

PLATED

BLUE

PURPLE

*BLACK

3-12 PSI/0.2-0.8 BAR

10-40 PSI/0.7-2.7 BAR

25-90 PSI/1.7-6.2 BAR

60-200 PSI/4-14 BAR

100-260 PSI/7-18 BAR

200-450 PSI/14-31 BAR

*GREEN

*ADJUSTING SCREW SPACER REQUIRED

HIGH PRESSURE

SPRING RANGE

BLACK

200-520 PSI/14-36 BAR

400-900 PSI/27-62 BAR

GREEN

ADJUSTING SCREW SPACER REQUIRED

1

2

3

Содержание Mooney 21 Series













Отзывы: