4 | Baker Hughes
© 2021 Baker Hughes Company. All rights reserved.
WARNING
BEFORE installing, using or carrying out any maintenance tasks associated with this
instrument, READ THE INSTRUCTIONS CAREFULLY.
The Y237 complies with the essential safety requirements of the European Directive ATEX
2014/34/EU.
It is certified to be used in Gas or Dust explosive atmospheres, groups IIA, IIB, IIC and IIIC, category 2
GD for ATEX zones 1
, 2, 21 & 22 with protection modes “db” and “tb”.
Products certified as
explosion proof equipment MUST BE
:
a)
Installed, put into service, used and maintained in compliance with European and/or
national and local regulations and in accordance with the recommendations contained in
the relevant standards concerning potentially explosive atmospheres.
b)
Used only in situations those comply with the certification conditions shown in this
document and after verification of their compatibility with the zone of intended use and the
permitted maximum ambient temperature.
c)
Installed, put into service and maintained by qualified and competent professionals who
have undergone suitable training for instrumentation used in areas with potentially
explosive atmosphere. Such trainings are not supported by Baker Hughes.
It is the end user
’s responsibility to:
•
Verify material compatibility with the application
•
Ensure proper use of fall protection when working at heights, per Safe Site Work
Practices
•
Ensure use of proper Personal Protective Equipment
•
Take the appropriate actions to ensure that site personnel who are performing
installation, commissioning and maintenance have been trained in proper site
procedures for working with and around equipment, per Safe Site Work Practices
Baker Hughes reserves the right to discontinue manufacture of any product or change product
materials, design, or specifications without notice.
Under certain operating conditions, the use of damaged instruments could cause a degradation
of the performances of the system which may lead to personal injury or death.
Use only Masoneilan replacement parts to ensure that the products comply with the essential safety
requirements of the European Directives mentioned above.
