Baker Hughes Masoneilan SVIII AP, Руководство по установке и обслуживанию, Страница: 80 / 204

© 2017 Baker Hughes, a GE company, LLC. All rights reserved.
80
|
BHGE
VIEW DATA Menu
This menu can be entered either from the MANUAL Mode menu or from the NORMAL Mode
menu.
The VIEW DATA menu allows you to read the current configuration, calibration, and status
information. This information cannot be changed from the VIEW DATA menu. Exiting from the
VIEW DATA menu returns the previous menu.
When entered from NORMAL mode the valve still responds to changes in set point input signal
and the values displayed change in accordance with changes in input signal. When entered
from MANUAL mode, the valve is locked in position. The parameters viewable by pressing
+
and - are:
SINGLE or DOUBLE
ATO or ATC
LINEAR, EQ% 30:1, EQ% 50:1, EQ% CAMFX, QUICK50, or CUSTOM
PSI, BAR, KPA
T.S. ON, T.S. OFF
SIGNAL LOW value (typically 4.00)
SIGNAL HI value (typically 20.00)
Viewing Configuration and Calibration Parameters
To view configuration and calibration parameters use the following procedure:
1. If in the NORMAL operating mode, press any button.
2. Press + to move through the options until you reach the VIEW DATA menu item.
3. Press
*
to go to VIEW DATA menu. (This leaves the valve in NORMAL mode.) If in MANUAL
mode, press + repeatedly until the VIEW DATA menu item is reached. Press
*
to select the
VIEW DATA mode.
4. To exit from the VIEW DATA menu, press * at any menu line. You return to the last menu
displayed.