Baker Hughes Masoneilan 4700P, Инструкция по эксплуатации

Страница: 19 / 66

Masoneilan 4700P/E & 4800P/E Positioners Manual | 19 © 2021 Baker Hughes Company. All rights reserved.
Positioner Mounting and Orientation
Camflex
TM
II, V-Max
TM
, MiniTork
TM
II, and Butterfly
The positioner is mounted to an intermediate plate (171) by two screws (29) and lockwashers
(30) with the gauges nearest the actuator on Camflex ( Figure 7 ) and with gauges away from
actuator on MiniTork II ( Figure 8), and HPBV 39004 (Figure 9 ). The intermediate mounting plate
(171) is held by two flat-head screws (172) to the bracket.
NOTE
The cam take-off hole must be centered about the
shaft.
Table 2 - Mounting Parts Reference
Ref.
No.
Description Ref.
No.
Description
29 Socket Head Screw 172 Mounting Plate Screws
171 Mounting Plate 30 Lockwashers
NOTE
The remainder of the mounting kit parts are used to before
tightening mounting screws. assemble the cam to the actuator.
See“Mounting Cam Coupling” on page 34.