Bake Max TCO6G, Инструкция по установке и эксплуатации, Страница: 25 / 92

Output management for special washing cycles;
The controller has an efficient water recirculation system with the appropriate type of detergent to
manage the washing typology:
- Washing with detergent tablet , with water recirculation system
At the beginning of each washing cycle, the camera automatically turns on, from the exclusive
option, you can turn it off or on again at any time.
The following is a detailed description of the washing typology:
There are 3 management relays dedicated to:
- Relay K10: solenoid valve for introducing water from condenser water network
- Relay K11: pump with recirculating water system
- Relay K12: Condenser water drain pump
This type of washing can also use a probe to control the drainage temperature of the water used for
washing, as the water temperature should not normally exceed 60-75 °C to be discharged in sewage
system (state regulation).
To enable temperature control of discharged water, the appropriate probe (alternating with the steam
reduction probe) with parameter P3 = 2 must be enabled.