18
ADJUSTING THROTTLE CABLE
Make sure throttle cable is adjusted properly. To adjust throttle cable, rotate
adjustment nut located at the hand throttle.
Check if throttle twist grip has the required free operating movement.
The required free operating movement: 2 - 6 mm (0.078 -0.24in) . If the grip cannot
be moved freely, turn the adjusting nut to ensure proper operating movement.
After adjustment, start engine and check for the operating movement again.
Repeat the adjustment if necessary until the desired operating movement is
obtained.
ADJUSTING CARBURETOR
Idle speed adjustment:
1. place vehicle in neutral and start engine.
2. Adjust idle speed by turning the throttle stop
screw to 1500 ± 100rpm.
CAUTION
Do not try to correct a malfunctioning carburetor by adjusting the idling
speed. If the carburetor is not functioning properly, it should be repaired
by a service center.
Adjust idle speed only when engine has been warmed up or 10 minutes after
operation.
Throttle cable adjust nut
Throttle stop screw
2 - 6 mm
(0.078 - 0.24 in.)
Throttle twist grip