manualshive.com logo in svg

BainUltra AMMA BALNEO, Руководство пользователя, Страница: 33 / 63

Поделиться
Скачать
BainUltra AMMA BALNEO Скачать руководство пользователя страница 33

33  

 

2-10

2-11

2-12

SKIRTS INSTALLATION | 

OWNER’S MANUAL

www.bainultra.com

Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.

2. INSTALLATION (CONT’D)

2-10   Insert top of panel between the bath 

rim and retainer clips. Position base of 

panel against toe kick.

2-11   Seat brackets on toe kick and adjust  

screws so that brackets are vertical.

2-12   Adjust panel height, leaving 1/4”(0.6 

cm) between the edge of the bath and 

the curved panel top.

2-13   Ensure brackets are well seated on toe 

kick and tighten wing nut as much as 

possible.

2-14   Remove panel and follow steps 2-10 to 

2-13 for the left panel.

2-15   Remove left panel and repeat steps 

2-10 to 2-13 with the center panel.

2-16   Leave center panel in place and rein-

stall the left and right panels, inserting 

top of panel first. 

NOTE:  Cut left and right toe  

kicks and panels as needed.

SJ-3 SE

Содержание AMMA BALNEO
































































Отзывы:

Нет отзывов