Bailey infi 90 NTAI05, Инструкция по эксплуатации

Страница: 11 / 29

INTRODUCTION
I-E96-416B 1 - 3
INSTRUCTION CONTENT
This manual has five sections and three appendices.
Introduction Contains an overview of the termination unit: features,
description and specifications.
Installation Describes cautions to observe when handling the termination
unit. It shows the steps needed to install and connect the unit
before applying power. This section also presents dipshunt
settings.
Maintenance Provides a maintenance schedule.
Repair/Replacement
Procedures
Details how to replace an NTAI05 unit.
Support Services Describes the support services (repair parts, training, docu-
mentation, etc.) available from Bailey Controls Company.
Appendix A Shows the IMASI02 Analog Slave Input Module.
Appendix B Shows the IMASM01 Analog Slave Module.
Appendix C Shows the IMFBS01 Field Bus Slave.
HOW TO USE THIS MANUAL
Read this manual before connecting the termination unit.
Refer to the sections in this list as needed for more
information.
1. Read the installation section before connecting the NTAI05
unit.
2. Refer to Appendix A, B or C for the slave module connected
to the termination unit for more information.
3. Refer to the maintenance section for a maintenance
schedule.
4. Refer to the repair/replacement procedures and support
services sections when needed.
REFERENCE DOCUMENTS
Table 1-1 contains the reference documents for the NTAI05
unit.
Table 1-1. Reference Documents
Number Description
I-E96-205
I-E96-302
I-E96-304
Analog Master Module and Analog Slave Modules
(IMAMM03 and IMASM01/02/03/04)
Field Bus Slave Module (IMFBS01)
Analog Input Slave Module (IMASI02)