INTRODUCTION
HARDWARE APPLICATION
I-E96-221A
1 - 3
Controls custom bus circuits and support circuitry. The board
attaches to the faceplate with two screws.
HARDWARE APPLICATION
Applications that require local tuning and configuration of
modules in an INFI 90 PCU unit can use the IMCPM02 module.
Since it interfaces to both a CTT terminal and an EWS station,
the IMCPM02 module minimizes hardware requirements.
INTENDED USER
The installation engineer needs to know how to handle and
work with electronic equipment safely. Installers should have
formal training in INFI 90 processes and configuration.
INSTRUCTION CONTENT
This manual provides introductory, installation, operation,
troubleshooting and maintenance information. Read and
understand this manual thoroughly before putting the module
into operation. Refer to the sections in this list as required for
more information.
Provides an overview of the module, a description of the hard-
ware, a glossary of terms and abbreviations and a table of
physical, electrical and environmental specifications.
Uses block diagrams to explain what the key circuits do.
Takes you through the handling, inspection, configuration and
installation aspects of the module.
Discusses the faceplate indicators and controls, and everyday
operation.
Contains tables that explain LED codes and corrective actions.
Describes how to maintain and replace the module.
Lists replacement parts and warranty policy.
HOW TO USE THIS MANUAL
Read this manual in sequence. To get the best use out of this
manual, read it from cover to cover, then go back to specific
sections. Bailey Controls strongly advises against putting the
module into operation until you have read and done all the
installation steps.
1. Read and do all steps in
.
