Baileigh TS-1040E 30, Руководство оператора

Страница: 34 / 52

31
31
OPERATION
Safety Precautions Before Operations
The operation of power tools involves a certain amount of hazard for the operator. Before
attempting regular work we recommend you get the feel of operations using scrap lumber to
check settings. Read entire instructions before you start to cut workpiece.
Always pay attention to safety precautions to avoid personal injury.
Electrical Operation
Become familiar with the location and operation of the Start and Stop
buttons. Practice reaching for the buttons, espesially the Stop button,
with power disconnected from the saw.
A
Start button
B Stop button
DO NOT stand directly inline with the saw blade when starting.
Operation
Plain sawing includes ripping and crosscutting, plus a few other standard operations of a
fundamental nature. The following methods feature safety. As with all power tools there is a
certain amount of hazard involved with the operation and use of the tool. Using the tool with the
respect and caution demanded as far as safety precautions are concerned will considerably
lessen the possibility of personal injury. However, if normal safety precautions are overlooked or
completely ignored, personal injury to the operator can develop. It is good practice to make trial
cuts using scrap material when setting up you saw for operation.
WARNING:
Never operate the saw with any gaurds or covers removed
missing or damaged. It could cause severe injury or death.
CAUTION:
Always wear proper eye protection with side shields or a face
shield, safety footwear, dust mask, and possibly heavy gloves to protect from, chips,
dust, burrs, and slivers.
WARNING:
Check that saw blade clamping system is tight before
operating the machine.
Fig. 29