Baileigh TS-1040E 30, Руководство оператора

Страница: 27 / 52

24
24
Dust collection
It is recommended that you use a dust collector
(not included) when using this machine. The
minimum air flow requirement for this machine are
listed below
. The machine comes with a 4” dust
port located on the side of the machine.
The dust extraction equipment is to be switched on
before commencing machining.
Air current speed is 20m/s for vacuum suction dust
emission index.
When air current speed of dust collector device (in
accordance with EN12779:2004) is not lower than
20m/s, ensure machine can be normal exhausted.
User must wear dustproof mask.
1. Required air flow: 1500 m3/h.
2. Ensure pressure drop of each dust collector outlet carrying air current speed: 1100Pa.
3. Wind speed of dust collector tube m/s:
Dry Chips: 20m/s,
Wet chips: 28m/s (water content is equal to18%)
Fig. 20