Baileigh RDB-480, Руководство оператора

Страница: 18 / 60

15
15
Item Description Function
A Forming Die
This is the die which the material will form around.
This die will be specific to a material size and to a
specific radius.
B Die Retaining Bolts
Bolts used to secure the die down to the spindle drive.
These MUST be installed and tightened during the
bending process.
C
Main Spindle and Drive Keys
(Drive keys are not shown as
the forming die is installed and
covering the keys.)
For Supporting the Bend Dies and driving the die
rotation to complete the bend.
D Upper Spindle Drag Link
Works between the spindle and the frame to eliminate
spindle deflection during the bend.
E Lower Spindle Drag Link
Works between the spindle and the counter die mount
to eliminate deflection between the spindle and the
counter die during the bend.
F
Hitch Pin (shown with a
counter die installed)
For mounting the counter die.
G Quick Release
For pivoting counter die away from bend die to
remove material quickly
H 3 Spoke Handwheel For adjusting the counter die position.
I Touch Screen Controller For programming bend data
J Power Cord (hidden)
The power cord exits the cabinet on the operator end
of the machine, to be routed to the power supply.
K Foot Pedal Guard Protect against accidental operation
L Forward Foot Pedal Will operate the machine in the cw direction
M Reverse Foot Pedal Will operate the machine in the ccw direction
N Cabinet
Houses the electrical components as well as the drive
motor and gear case assembly.