41
41
INDEX TABLE ATTACHMENT (OPTIONAL EQUIPMENT)
Introduction
The IDX-10 Indexing table was designed to allow you too accurately and repeatedly position
distances between bends, by using the adjustable stops. Also the IDX-10 can be used to hold
the material being bent perfectly level while bending, or altering the angles between bends.
Connection to Your Machine
1. Remove the shaft mounting bracket [#2] (angle iron) leaving the slide shaft [#16] in place.
2. Slide the front of the main track tube [#1] onto the slide shaft [#16].
3. Reattach the shaft mounting bracket [#2] and tighten bolts.
4. With the front of the main track tube attached, lift up the rear and support it with a sturdy saw
horse or equal.
5. Attach the rear leg adjuster [#13] using the supplied 3/8 X 1” bolts.
6. Align the keyways with the slide bolt and slip the caster mount [#12] onto the leg adjuster
[#13].
Height Adjustment and Leveling
1. Level your machine on a flat hard surface. The Model 250 comes standard with wheels and
casters. It may be necessary to fasten or lock the machine in place to keep the machine from
rotating instead of the index table. (The index table must be allowed to pivot and rotate with
its wheels.)
2. With the machine level, choose the desired die set.
3. The thickness of the die determines the height of the
index table. Using the table to find the correct number
of turns required for your die.
4. Rotate the height adjustment screw [#21] clockwise
until it stops. This is the lowest the table will go.
(EXAMPLE 1-1/2 die)
5. Rotate the adjustment screw [#21] counter clockwise
the exact number of turns that were chosen from the
chart.
6. Using a 2 ft. level placed on the main track tube, rotate the large nut [#35] until the main
track tube is level.
7. Position the front of the main track tube so the center line of the track tube matches the
center (radius) line of the die.
Height Adjustment
Counter-Clock Wise To Raise
Turns CCW
Die Thickness
0.0
1.50
2.5
2.00
5.0
2.50
7.5
3.00
10.0
3.50
Содержание RDB-250
