Baileigh RDB-250, Руководство оператора

Страница: 22 / 63

19
19
Main Menu Choices
1. "RUN, VIEW OR EDIT A PROGRAM" Select this Feature if you want to:
Run a program
View the settings of an existing program
Edit or create a program.
a. Up to 170 programs with 10 bends per
program can be created using any
alphanumeric characters.
b. From the Program selector screen Fig 5,
choose the program you wish to edit by
touching the name of the program from the
right side column. Use the up and down
arrows to move the screen up or down one
line or one page at a time. Dashed lines in
the name indicate that no program is saved
to that location.
c. After selecting the program. Touch the
EDIT button (Fig 5) and the program
parameters will be displayed Fig 6. Press
the View button at the top of the screen to
change to the Edit mode.
d. Verify that the bend to be edited is
selected. Press the box for the parameter
to be changed and the digit key pad will
open. Enter the desired numbers. Add
zeros as needed to move the decimal
position.
e. When the changes have been completed,
press the SYSTEM button below the Save
box. If this is a new program, the alpha key
pad will open to allow the program to be
named and saved.
Note: The bottom row of function boxes are controlled by the actual buttons below
the touch screen.
OP Screen Figure 5
OP Screen Figure 6