Baileigh DP-3814B, Руководство оператора

Страница: 26 / 40

24
24
Worktable Adjustment
The worktable may be adjusted three ways;
Elevation, rotating around the column, and tilting.
Note: Always remove all material, tools
and vises before adjusting the worktable.
Elevation and Rotation
1. Support the worktable and loosen the clamping
bolt (A).
2. Lift, lower and/or rotate the table as desired.
Notice in the picture for head adjustment that the
table is rotated to the back out of the way to allow
for the base table to be used.
3. Hold the table in position and tighten the clamping
bolt (A).
Tilt
1. Support the worktable and loosen the tilting nut
(B).
2. Use the scale at the back of the table as an
indicator of the degree of tilt.
3. When the table is at the desired tilt angle, hold in
position and tighten the nut (B).
B
A