Baileigh BP-3142NC Скачать руководство пользователя страница 10

Страница: 10 / 48

Use the right tool for the job.

DO NOT

attempt to force a small tool or attachment to do the

work of a large industrial tool.

DO NOT

use a tool for a purpose for which it was not

intended.

Dress appropriate.

DO NOT

wear loose fitting clothing or jewelry as they can be caught in

moving machine parts. Protective clothing and steel toe shoes are recommended when
using machinery. Wear a restrictive hair covering to contain long hair.

10.

Use eye and ear protection

. Always wear ISO approved impact safety goggles. Wear a full-

face shield if you are producing metal filings.

11.

Do not overreach

. Maintain proper footing and balance at all times.

DO NOT

reach over or

across a running machine.

12.

Stay alert

. Watch what you are doing and use common sense.

DO NOT

operate any tool or

machine when you are tired.

13.

Check for damaged parts

. Before using any tool or machine, carefully check any part that

appears damaged. Check for alignment and binding of moving parts that may affect proper
machine operation.

14.

Observe work area conditions

DO NOT

use machines or power tools in damp or wet

locations. Do not expose to rain. Keep work area well lighted.

DO NOT

use electrically

powered tools in the presence of flammable gases or liquids.

15.

Blade adjustments and maintenance

. Always keep blades sharp and properly adjusted for

optimum performance.

16.

Keep children away

. Children must never be allowed in the work area.

DO NOT

let them

handle machines, tools, or extension cords.

17.

Store idle equipment

. When not in use, tools must be stored in a dry location to inhibit rust.

Always lock up tools and keep them out of reach of children.

18.

DO NOT operate machine if under the influence of alcohol or drugs

. Read warning

labels on prescriptions. If there is any doubt,

DO NOT

operate the machine.

19.

DO NOT

touch live electrical components or parts.

20. Be sure all equipment is properly installed and grounded according to national, state, and

local codes.

21.

DO NOT

bypass or defeat any safety interlock systems.

22. Keep visitors a safe distance from the work area.

Содержание BP-3142NC

















































Результаты поиска

Содержание BP-3142NC

Отзывы:

Похожие инструкции для BP-3142NC

Бренды по названию

Популярные бренды

Baileigh BP-3142NC, Руководство оператора

Результаты поиска

Содержание BP-3142NC

Отзывы:

Похожие инструкции для BP-3142NC

Бренды по названию

Популярные бренды