Baileigh Industrial IP-1306, Руководство оператора

Страница: 22 / 48

19
19
ADJUSTMENTS
Levelling Extension Tables
The extension tables must be level with the planer table.
To check the extension tables and adjust if necessary:
•
Lay a straight edge (A) on the planer
table (C) with one end of the straight
edge over the infeed table (B).
•
Check to make sure that the infeed
table is level with the planer table.
•
If an adjustment is necessary, raise
table, loosen lock nuts (D) and adjust
Hex Head Screws (E) on each side of
the table until the infeed table is level
with the planer table. This will adjust
the outer edge of the table.
•
Recheck for level and repeat
adjustment if necessary.
•
Repeat this process for leveling the
outfeed table.
WARNING:
Make sure the electrical disconnect is OFF before working on
the machine.