Baileigh Industrial DP-1850G, Руководство оператора

Страница: 26 / 52

23
23
Do not ever use tools which were not designed to be used in a drilling machine and that have
been adapted.
A drilling machine can also perform other machining operations a part from the drilling, such as
tapping, reaming, chamfering, punch marking, countersinking, spot facing, to perform such
operations, it is necessary to have appropriate tools, specially designed for this sort of jobs. In
the tapping case, besides using correct tool, the machine has to be provided with such a device
that reverses the turning direction of the tool when it reaches the depth previously fixed.
Drill Protection Guard
The machine is provided with a security drill guard.
Before pressing the starting push button, set the drill guard in
the working position, otherwise the machine controls will not
start.
Important: If the guard is opened when operating
the machine, the machine will stop. DO NOT REMOVE THE
GUARD UNDER ANY CIRCUMSTANCES.
Speed Range and Speed Change
By means of levers, the spindle speeds are selected.
In various combinations, a total of 12 different spindle
speeds (rpm) may be selected. Follow the chart on the
face of the drill head to set the shift levers to the
desired speed.
Important: DO NOT change spindle
RPM until the spindle has stopped completely.
Match the shift lever position to the picture on the
chart. The left shift lever is pictured along the top of the chart.
The right shift lever is pictured along the right edge of the chart.
The chart is also divided into additional columns to show the rpm if the machine is wired to
50hz or 60hz power supply. Stop the machine when changing the speed gears.
The actual spindle speed will be shown on the digital display.
If spindle speed change is difficult, use the micro feed handle to align the gears for
engagement.