Baileigh Industrial BS-330SA, Руководство оператора

Страница: 52 / 76

49
49
Gear Case
The gear box lubricant should be changed after the first 3 months of operation then changed
every year.
1. Disconnect machine from the power source.
2. Remove drain plug (A) and drain all of the
oil out of the gear box.
3. Replace the drain plug.
4. Remove oil filler plug (B) located
underneath the right blade wheel and fill the
gear box with 1-1/2 pints (.7L) of MOBIL
CYLINDER OIL # 60W or equivalent.
5. Verify that the oil level reaches dot in middle
of sight glass.
6. Replace filler cap.
7. Connect machine to the power source.
8. Use a light machine oil to lubricate all other
moving parts as needed.
Hydraulic Oil
The hydraulic oil is the primary medium for transmitting pressure and also must lubricate the
running parts of the pump.
After installation of the machine and before machine startup, bring the oil level up to 90% of
capacity.
A shortage of hydraulic oil can cause hydraulic system breakdown and
damage to major mechanical parts due to overheating .
1. Use SHELL BRAND #46 or #68 hydraulic oil or an equivalent with similar specifications.
(Based upon location temperature and availability.)
2. Keep hydraulic reservoir filled to 90% of capacity.
3.
DO NOT rely totally on the oil gauge as they can sometimes indicate an incorrect level
reading. Do a visual inspection with the oil fill cap removed as well.
4. A shortage of hydraulic oil will cause hydraulic system breakdown to major mechanical
components due to overheating.
5. Change the hydraulic oil every 12 months along with the oil filter.
A
B