Baileigh Industrial BR-16E-36, Руководство оператора

Страница: 19 / 36

17
17
5. Grease the zerk fittings on the main shaft bearings for the top axle and the lower sprocket
axle after every (8) hours of use. (see below)
6. The VEE rollers may need adjusting throughout the life
of your machine. The 2 rollers with the hex are the
adjusters and the 2 with the round mounts are fixed. To
adjust, loosen the lock bolts with a 1/2” wrench, using a
13/16” wrench rotate the hex mount until the desired
tension is achieved between the rollers and retighten
while holding the 13/16” wrench. Do this to both the top
and lower roller.