Baileigh Industrial BCF-3019, Руководство оператора

Страница: 27 / 44

25
25
Problem Possible Cause Solution*
Fan motor will not start.
No incoming current.
Check connections at plug or
circuit panel.
GFCI on machine has tripped.
Push RESET on GFCI
receptacle.
Low voltage.
Check power line for proper
voltage.
Open circuit in motor or loose
connection. Inspect switch and motor for
loose or open connections.
Faulty start switch.
Inspect and replace switch if
needed.
Faulty start capacitor. Replace capacitor.
Faulty motor.
Inspect and replace motor if
needed.
Fan motor will not start:
Fuse blows or circuit
breaker trips.
Too many machines on shared
circuit. Connect unit to dedicated
circuit.
GFCI on machine has tripped.
Push RESET on GFCI
receptacle.
Short circuit in line cord or plug.
Inspect cord or plug for
damaged insulation and shorted
wires.
Short circuit in motor or loose
connections.
Inspect all connections on motor
for loose or shorted terminals or
worn insulation.
Incorrect fuse or circuit breaker
in power line. Install correct fuse or circuit
breaker at power source.
Motor overheats. Motor overloaded. Allow to cool, then restart.
Thermal protector trips
frequently.
Incorrect fuse or circuit breaker
in power line. Install correct fuse or circuit
breaker at power source.
Fan used for extended periods
of time, motor overheats.
Allow to cool, then restart.
Loud noise or vibrations
coming from machine.
Loud noise or vibrations Loud noise or vibrations
coming from machine. coming from machine.
Loose fasteners. Inspect
machine and tighten all
fasteners. Loose fasteners. Inspect
machine and tighten all
fasteners.
Fan is loose or imbalanced.
Inspect and tighten/repair. Fan is loose or imbalanced.
Inspect and tighten/repair.
Not cooling, or
unsatisfactory misting
effect.
Tank empty, float switch
activated.
Fill with clean water.
Water filter clogged. Clean out filter.