Baileigh Industrial BCF-3019, Руководство оператора

Страница: 14 / 44

12
12
INSTALLATION
IMPORTANT:
Consider the following when looking for a suitable location to place the machine:
•
Overall weight of the machine.
•
Clearance from walls and other obstacles.
•
Maintain an adequate working area around the machine for safety.
•
Have the work area well illuminated with proper lighting.
•
Keep the floor free of oil and make sure it is not slippery.
•
Remove scrap and waste materials regularly, and make sure the work area is free from
obstructing objects. Especially loose items that will be blown by the fan force.
•
LEVELING: The machine should be sited on a level surface capable of supporting the
weight of the fan with a full tank of water. The surface should provide support for all four
wheels to prevent wobbling, vibration, and unintended movement.
•
WORKING CLEARANCES: Take into consideration the size of the material to be
processed. Make sure that you allow enough space for you to operate the machine freely.
•
POWER SUPPLY PLACEMENT: The power supply should be located close enough to the
machine so that the power cord is not in an area where it would cause a tripping hazard. Be
sure to observe all electrical codes if installing new circuits and/or outlets.
GETTING TO KNOW YOUR MACHINE
About This Machine
The BCF-3019 is designed for areas more than 3,000 square feet. Its hydro-pneumatic system
atomizes water into very fine particles which evaporate instantly in the high-velocity airstream,
reducing the temperature of the expelled air to create an immediate cooling effect.
The absence of conventional pads, and its micro-atomization of the water means lower risk of
clogging and less need for maintenance. The low-pressure pump contributes to energy
efficiency.
Your machine has been designed and constructed to provide consistent, long-term operation if
used in accordance with the instructions set forth in this document.
It is intended and designed to use potable water only!