![Baicells ATOM OD06 CPE Скачать руководство пользователя страница 11](http://html1.mh-extra.com/html/baicells/atom-od06-cpe/atom-od06-cpe_installation-and-configuration-manual_3446299011.webp)
11
Table 3: LEDs
LEDs vary by model – not all models will have all of the LEDs listed below.
Identity
Description
Color
Status
Description
MIU
-
Yellow
Off
Reserved for future use
Steady On
Reserved for future use
Blinking
Reserved. for future use
LTE
LTE network status
Blue
Off
The UE is not connected to the network
Steady On
The UE is connected to the LTE network
SIM/USIM
SIM/USIM card status
Yellow
Steady On
The USIM card is functioning normally
Blinking
The USIM card is not inserted or is not
functioning normally
LAN
100 or 1000 Mbps Local
Area Network
Ethernet status
Yellow
Off
No Ethernet connection established
Steady On
Ethernet connection is normal
Blinking
Data is transmitting
PWR
Power status
Yellow
Off
No power supply to the UE
Steady On
Power to the UE is on
LTE Signal
1, 2, 3, 4, or 5 bars to
indicate wireless
connection status. The
more bars, the stronger
the signal between the
UE and a network cell
(eNB).
Green
All Off
The signal is too weak for the UE to connect to
the network
Steady On
Bars will light steadily according to signal
strength
Blinking
The UE is scanning the network
The UE is authenticating with the network
The UE is getting an IP address from the
network
Table 4: Interfaces
Interfaces vary by model – not all models will have all of the interfaces listed below.
Interfaces
Description
PoE
Power over Ethernet (PoE) power adaptor
TF or SD Slot
Card slot for a secure digital (SD) card
SIM/USIM Slot
Universal Subscriber Identity Module card slot, 1.8V/3.0V USIM 2FF
RESET
Reset/restore button
GND
Ground lug. The unit is connected to Earth by conductor.
2.4. Preparing to Install
To help ensure a smooth and successful installation, check that you have all of the parts, materials, and
tools you will need, per
section 2.1 Parts & Materials
. When selecting the best outdoor location for the
installation, plan on placing the UE so that it faces the nearest eNB. You may need to adjust the tilt and
angle for optimum signal reception.
2.5. Installation
1.
Loosen the screws on the UE's waterproof cover, and open the cover.