BAIC Senova D70, Руководство пользователя

Страница: 108 / 264

102
Wiper combination switch (with rain
sensor)
①
MIST
：
Single wiper
② OFF ： Stop
③
INT
：
Intermittent wiper
④ LO ： Low speed wiper
⑤
HI
：
High speed wiper
⑥ Automatic wiper sensitivity adjustment
knob
When the system senses the rain, the
keyless start / stop button is in "run" and the
wiper switch is in "auto" position, the
windshield
wiper will be turned on
automatically, and the wiper speed will be
changed according to the rainfall.
When the wiper control lever is in the "Lo"
(low
speed wipe) or "Hi" (high speed wipe)
position, the front wiper will wipe at the set
speed, and the auto sensing function will not
work at this time.
Warning
●Do not place the wiper control lever in the
"auto" position when washing the car with
the automatic car washer, otherwise the
wiper may be damaged. Turn off the system
when the wipers are not required.
The automatic wiping speed of the system
can be adjusted by turning the automatic
wiping sensitivity adjusting knob.
The sensitivity is divided into four levels.
Rotate the knob up to the highest level 4
(the fastest), rotate the knob down to the
lowest level 1 (the slowest), and the order
of the middle position is level 2 and level 3.
Adjust the speed of the automatic wiper to
meet your driving habits.