193
Safety instructions for working in
engine compartment
General instruction
The engine compartment is a dangerous
area.If you are not familiar with necessary
operations and general safety precautions,
do not work in the engine compartment
without proper tools!Please transfer all
operations to dealership.Improper work can
lead to injury. Before all operations in the
engine
compartment,
the
following
operations shall be performed:
1. Park the vehicle in a safe area, on a flat,
load-bearing surface.
2. Apply parking brake, put the gear in "P" or
neutral, close the engine and wait for the
engine to cool down.
3. Keep children away from the vehicle.
4. Open engine hood .
5. Please make sure the car doesn't slip by
accident.
Danger
● Before opening the engine hood, if steam
or
coolant
overflow
from
engine
compartment, do not open the engine cover,
beware of scald! Waiting for engine cooling,
until can not see steam or coolant overflow
● Do not operate in the engine compartment
when overheating, such as inspection and
addition of oil, so as to avoid injury and
scald operators, or even cause a fire.
● Do not touch the cooling fan. The cooling
fan is controlled by temperature and may
turn on automatically when the engine is
out.
● Check your vehicle for oil leakage. Avoid
dripping oil onto a hot engine or exhaust,
which can be a fire hazard.
Danger
● When adding oil, do not mix up all kinds of
oil, otherwise it will cause serious functional
failure of the vehicle.
● If under the car operation, should take
appropriate measures to prevent the car slip
or with the appropriate support vehicle. In
this case, it is not suitable to support the
vehicle with the jack assembly only, beware
of causing injury to the operator under the
car!
● if you have to start or run the engine
operation, be careful at all times, beware of
accessories such as belts, generators,
cooling fans and other rotating parts and
high-pressure
ignition
system
injury
operators!
Содержание Senova D70
Страница 6: ......
Страница 191: ...185 Clean the inside of the vehicle 218 Anti corrosion measures 219 Recycling and environmental protection 220 ...
Страница 255: ...249 Vehicle Parameter Dimension mm Note the vehicle outside rearview mirror do not count in the outside dimension ...
Страница 260: ...254 7 Maintenance Information Maintenance Specifications 255 Maintenance Information Sheet 256 ...