23
Figure 3-19: LGW
7.
Verify or configure the Quick Settings (Figure 3-20). These settings are important for
LTE transmissions. Go to the BTS Info > Quick Setting menu. Some settings will be auto-
configured based on eNB model and will be greyed out. Most of the fields are standard
LTE types of settings.
Figure 3-20: Quick Setting
a.
When connecting the eNB to the Baicells CloudCore, you must use PLMN ID =
314030 and MME IP addresses 10.3.0.9 and 10.5.0.9.
b.
Bandwidth setting may be 5, 10, 15, or 20 MHz.
c.
Select the correct frequency within the band for this eNB to use.
d.
Select the SubFrame Assignment (SFA or SA). SFA determines the amount of
transmission resources in the downlink and the uplink, and is expressed as a
ratio of DL:UL. For example, setting the SFA value to 1 means a 2:2 ratio will
be applied to transmissions, where an equal number of RF resources will be
available in the downlink and in the uplink.
i.
0 = 1:3
ii.
1 = 2:2
iii.
2 = 3:1
