15
3.2.1
Bracket for Pole Mount
1.
Fix one of the mounting brackets on the eNB using M6*16 screws (Figure 3-2).
Figure 3-2: Pole Mounting Bracket
2.
Continue to section 3.3 if you will be connecting an optional external GPS antenna.
Otherwise, go to section 3.4.
3.2.2
Hooks for Wall Mount
Fix the 3 mounting hooks on the ends of the eNB unit using M6*16 screws (Figure 3-3).
Figure 3-3: Wall Mounting Hooks
3.3 Optional: Attach GPS Antenna to eNB
If you are going to install an optional external GPS antenna, you will need to install a GPS
antenna lightning arrestor before connecting the antenna to the eNB. If more than one
antenna will be installed at the same location, separate the antennas by 2.2 yards (2 meters).
Follow the steps below to attach a GPS antenna to the eNB.
1.
Prepare the necessary components: GPS antenna, feed cable, GPS mounting bracket
1, and GPS mounting bracket 2.
2.
Fix the GPS mounting bracket 2 on the eNB using M4 screws, as shown in Figure 3-4.
