Bahco XT912 Series, Инструкция по эксплуатации

Страница: 11 / 16

INSTRUCTION MANUAL
11
Reagular servicing should be carried out and a comprehencive inspection performed
annually or every 500.000 cycles, whichever is sooner.
IMPORTANT!
The employer is responsible for ensuring that tool maintenance instructions are
given to the appropriate personnel. The operator should not be involved in main-
tenance or repair ofthe tool unless properly trained.
Daily
‡'DLO\EHIRUHXVHRUZKHQ¿UVWSXWWLQJWKHWRROLQWRVHUYLFHSRXUDIHZGURSVRIFOHDQ
OLJKWOXEULFDWLQJRLOLQWRWKHDLULQOHWRIWKHWRROLIQROXEULFDWRULV¿WWHGRQWKHDLUVXSSO\
If the tool is in continuous use, the air hose should be disconnected from the main air
supply and the tool lubricated every two days to three hours.
‡&KHFNIRUDLUOHDNV,IGDPDJHGKRVHVDQGFRXSOLQJVVKRXOGEHUHSODFHGZLWKQHZ
items.
‡,IWKHUHLVQR¿OWHURQWKHSUHVVXUHUHJXODWRUEOHHGWKHDLUOLQHWRFOHDULWRIDFFXPXODWHG
dirt or water before connecting the air hose to the tool.
‡&KHFNWKDWWKHQRVHDVVHPEO\LVFRUUHFW
‡&KHFNWKDWWKHVWURNHRIWKHWRROLVDGHTXDWHWRSODFHWKHVHOHFWHGLQVHUW
(See stroke adjustement page 6).
‡,QVSHFWWKH0DQGUHO (1)
in the nose assembly for wear or damage. If found, replace.
Weekly
‡&KHFNIRURLOOHDNVDQGDLUOHDNVRQDLUVXSSO\KRVHDQG¿WWLQJV