![background image](http://html1.mh-extra.com/html/bafang/h310/h310_dealers-manual_3053318004.webp)
4
BF-DM-C-RM G050-D-EN July 2022
6.3 DRIVE UNIT INSTALLATION
6.3.1 List of Tools to be used
Use of the Tools
Tools
To tighten/loosen the BC3/8 cap nut.
Open-end wrench
To tighten/loosen the M5*8 hex screws onto the disc brake.
Internal hex wrench
6.3.2 Motor Installation
1. Mount the stop pin onto the shaft of
motor's non-wire end.
2. Tighten the disc brake onto the motor with
six M5*8 screws and place the motor onto
the frame.
3. Mount the washers onto the shaft from
both sides.
4. Fasten the BC3/8 cap nuts clockwise onto
the shaft ends with an open-end wrench.
Torque requirement: 30-36 N.m.