UniMod GSM-4
11
6
Installation Hints
The installation must be done in a way, that even in the case of cable break
no dangerous voltages are applied to touchable parts of the device includ-
ing the antenna. This can be accomplished e.g. by using cable ties and ap-
propriate shortening of the cables.
For installation insert the SIM card correctly and tighten it by using the
clamp of the card reader:
1) First open the clamp by shifting
the slide in the arrow’s direction
(OPEN). After release you can open
the lid and insert the SIM card as
shown in the picture. Please note
the position of the bevelled edge: it
must point at the upper-right side.
The golden contact pads have to
point downwards.
2) Insert the card until the lid can be
closed as shown in the picture. The
slide must be movable in this posi-
tion. Please note the position of the
bevelled edge. Now move the slide
against the arrow’s direction until it
clicks into place and the lid is
locked. The SIM card is now ready
to use.
3) After that connect the antenna to the UniMod GSM-4 using the FME
plug.
At last
(important!)
connect it to the supplying power.
