ORION® SE Gateway Transceiver
Install a NEMA (4x if outdoors) enclosure according to state and local electrical codes, installed so as to be accessible by
authorized personnel from ground level.
Minimum Enclosure size: 12” x 10” x 6”
Your NEMA enclosure should contain a hole large enough to pass the ORION SE Gateway Transceiver power / communication
cable through. The hole must be sealed with the appropriate NEMA 4x approved cord or conduit sealing device.
Outlets and enclosure not included.
POWER REQUIREMENTS
AC Power
Badger Meter provides a DC to AC power supply which plugs into a standard three-prong 110VAC outlet. If you are powering
the Gateway Transceiver directly via DC power, please refer to the DC power information.
Page 14
(1-11)
