ORION® SE Gateway Transceiver
Figure 7: Close up of right side Band-IT connection
Assembly Instructions for M12 Connector (Power Source)
NOTE: Use only approved Badger Meter cable, part numbers: 66233-015 (100 ft) or 66233-017 (300 ft) for this assembly.
Connector Part Names
Figure 8: Connector Parts
1.
Push the pressure nut, clamping cage, cable seal, sleeve with o-ring and coupling sleeve onto the cable.
Figure 9: Connector Parts on Cable
NOTE: Align the female insert tab slot with the coupling sleeve slot:
Figure 10: Slot Alignment
Female Insert
Coupling Sleeve
Sleeve
w/O-ring
Cable
Seal
Clamping
Cage
Pressure
Nut
Sleeve
w/O-ring
Cable
Seal
Clamping
Cage
Pressure
Nut
Female Insert
Tab Slot
Coupling Sleeve
Insert
Page 10
(1-11)
