ORI-AS-00036-EN-06
When complete, a message displays as shown to
confirm the firmware version update.
Figure 25: Click
OK
to confirm update
7 Click
OK
to acknowledge the message
NOTE:
N
If the gateway reboots but you do not see the confirmation message, exit and reopen the software.
See
“Using the Software” on page 13
if you need help
Then continue to step 8.
8 Access the gateway information screen to verify the firmware version is updated in the
Firmware Version
field
9 Exit the software, disconnect the programming harness from the computer and reconnect the gateway power
The firmware update is complete
Updating the Gateway Firmware
Page 27
April 2015
