ORI-AS-00036-EN-06
•
Connect the double-wire end of the programming harness to the 308 connector on the DC power cable, and the
single-wire end to the 308 connector on the power supply cord as shown below
NOTE:
N
Each harness connector end is different Make sure the connector ends fit correctly into the connectors
on the power supply cord and cable
Figure 12: Harness connected to gateway
2 Connect the RS232 serial port connection of the programming harness to the serial port on the computer with the
configuration software
If the computer does not have a serial port, use a USB to serial port adapter
3 Reconnect the power supply to the gateway
4 Click the computer desktop icon to launch the configuration software (See
)
Result: The Connection Settings window opens.
Connecting to the Gateway
Page 11
April 2015
Programming
harness inserted
between DC power
cable and power
supply cord
DC power cable
connection to
gateway
Connection to
power supply
RS232 serial port
connection to
computer
Power supply
cord
